Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12

RT-80 Rotary Tiller

$2,349.00
SKU:
RT-80
Weight:
781.00 LBS
Rating:
Shipping:
Calculated at checkout

Product Description

shipping2.jpg

*RT-80S CURRENTLY SOLD OUT. MORE AVAILABLE IN JULY 2014

WEIGHT

781 LBS.  TILLERS NEED TO BE HEAVY IN ORDER FOR THE TINES TO PENETRATE THE GROUND, AND REDUCE BUCKING.

WORKING WIDTH

73”

OVERALL WIDTH

78”

OFFSET

10” TO THE RIGHT OF CENTER. CLICK FOR PICTURE. THE TILLER IS OFFSET FROM THE CENTER OF THE PTO SO THAT YOU DON’T END UP WITH COMPACTED TIRE TRACKS IN YOU FINISHED BED.

ROTATION 

FORWARD, SAME ROTATION AS THE TIRES OF THE TRACTOR WHEN TRAVELING FORWARD. THIS ROTATION REQUIRES LESS HP TO OPERATE; ALLOWS FOR A SMOOTHER BED OF SOIL BEHIND THE TILLER, AND ALLOWS ROCKS TO EXPEL WITHOUT RECYCLING THEM THROUGH THE TILLER. CLICK FOR PICTURE

HP REQUIRED

30-55 HP

WORKING DEPTH

ADJUSTABLE SIDE RUNNERS TO 8” DEEP. ADJUSTABLE AND REPLACEABLE SIDE RUNNERS ALLOW FOR DEEP TILLING. CLICK FOR PICTURE 1. CLICK FOR PICTURE 2.

NUMBER OF FLANGES 

8 THIS IS THE TOTAL # OF DISC ON THE ROTOR THAT SUPPORT THE TINES. THESE DISC ARE PRECISELY SPACED TO MAXIMIZE TILLING COVERAGE WHILE AT THE SAME TIME REDUCE JAMMING CAUSED BY ROCKS AND DEBRIS. CLICK FOR PICTURE

TINES PER FLANGE

THE 6 INNER FLANGES USE 6 TINES. CLICK FOR PICTURE; THE 2 OUT FLANGES USE 3 INWARD FACING TINES. CLICK FOR PICTURE. THIS CONFIGURATION REDUCES THE IMPACTING OF DIRT BETWEEN THE OUTSIDE FLANGES AND THE SIDE PLATE ULTIMATELY WEARING ON THE BEARING SEALS, AT THE SAME TIME REDIRECTING THE SOIL TO THE INSIDE OF THE TILLER INSTEAD OF SPILLING IT OUT THE SIDES OF THE TILLER. WOODMAXX EXCLUSIVE DESIGN.

TOTAL # OF TINES

42 TINES ARE PRECISELY SPACED TO MAXIMIZE DOWN PRESSURE ON EACH TINE AS THE ROTOR TURNS. THEY ARE ALSO SPACED TO ALLOW ROCKS AND LARGE DEBRIS TO BE EASILY EXPELLED. CLICK FOR PICTURE

BLADE TYPE

SELF SHARPENING C-SHAPED. CLICK FOR PICTURE. COMPARED TO L- SHAPED, THE C- SHAPE IS MORE EFFICIENT , AND REQUIRES LESS HP TO DIG INTO THE SOIL. THE GRADUAL C-SHAPE IS STRONGER THAN THE SHARP BEND OF THE L-SHAPED BLADES.

BLADE (TINES) MATERIAL

.25” 60SI2MN, SPRING STEEL, (AMERICAN STANDARD: A29M) FORMED, HEAT TREATED, AND QUENCHED IN OIL. THESE BLADES ARE SELF-SHARPENING AND MADE TO LAST.

ROTOR DIAMETER

3” DIAMETER 5/16” WALL TUBE. LARGE TUBE DIAMETER ADDS STRENGTH AND RIGIDITY. CLICK FOR PICTURE

ROTOR SWING DIAMETER

19 ½” DIAMETER.  LARGE SWING DIAMETER ALLOWS FOR DEEP DIGGING.

ROTOR SHAFT SPEED

540 RPM PTO INPUT SPEED =210 RPM ROTOR SHAFT SPEED. THE ROTOR SPEED IS MATCHED WITH THE # OF TINES TO REACH THE IDEAL TORQUE REQUIRED TO TEAR THROUGH THE EARTH.

DECK MATERIAL

SHAPED AND FORMED 5/32”, .16”, 8- GAUGE. HEAVY FORMED Q-235 (AMERICAN STANDARD ASTM A-36) STRUCTURAL STEEL PLATE. FORMING ALLOWS FOR ADDITIONAL STRENGTH AND RIGIDITY.

SIDE PLATE MATERIAL

5/16”, .32”. HEAVY Q-235(AMERICAN STANDARD ASTM A-36) STRUCTURAL STEEL PLATE; THINK STEEL TO ENSURE STRUCTURAL INTEGRITY OF THE UNIT DURING HEAVY USE. CLICK FOR PICTURE

REAR DEFLECTOR

KEEPS DIRT IN AND MAINTAINS A LEVEL FINISH. THE DEFLECTOR IS SHAPED AND FORMED FOR ADDITIONAL STRENGTH. ADJUSTABLE DEFLECTOR LEVEL ALLOWS FOR VARIOUS FINISH RESULTS. CLICK FOR PICTURE

MAIN GEARBOX

ASAE 1- 3/8" - 6 SPLINE SHAFT, PROVEN CAST IRON, OIL BATH GEARBOX; RATIO IS 1.69:1. CLICK HERE FOR PICTURE

SIDE GEARBOX

OIL BATH GEAR DRIVEN SIDE GEAR DRIVE MECHANISM; GEAR RATIO IS 1.52:1 GEAR DRIVE IS SUPERIOR TO CHAIN DRIVE IN EVERY WAY. PICTURE 1: PICTURE 2: PICTURE 3: PICTURE 4

HITCH TYPE

STANDARD 3 POINT HITCH. CLICK FOR PICTURE. OR CAT 1 QUICK HITCH 14A, CLEVIS TYPE LOWER HITCH MAKE ATTACHING TO YOUR TRACTOR A BREEZE.

PTO SHAFT

T5 DRIVELINE WITH SLIP CLUTCH TORQUE LIMITER. CLICK FOR PICTURE. COMPETITORS DON’T USE THE HEAVY T5 TYPE THAT WE DO. THE SLIP CLUTCH IS A MUST WHEN TILLING. THE SLIP CLUTCH WILL SLIP A LITTLE DURING HEAVY TILLING OR WHEN CONTACTING AN UNMOVABLE OBJECT. CLICK FOR PICTURE.

PARKING STAND

SUPPORTS THE TILLER DURING STORAGE TO PREVENT IT FROM TIPPING. CLICK FOR PICTURE

FINISH

BAKED ON POWDER COAT, POWDER COAT IS SUPERIOR TO PAINT

WARRANTY

2 YEAR PARTS WARRANTY

PART/SERVICE

AT WOODMAXX OUR SERVICE DEPARTMENT IS STAFFED WITH PROFESSIONAL CERTIFIED TECHNICIANS THAT INSPECT EACH MACHINE BEFORE IT IS SHIPPED. THIS ENSURES THAT YOU GET A TROUBLE FREE MACHINE FROM THE GET GO. WHEN YOU NEED TECHNICAL HELP OR PARTS, OUR COURTEOUS STAFF CAN HELP YOU GET WHAT YOU NEED FROM OUR FULLY STOCKED WAREHOUSE. WE KEEP A FULL LINE OF REPLACEMENT PARTS, AND GUARANTEE THAT WE CAN SHIP ANY PART WITHIN 24 HOURS

TECHNICAL DRAWINGS

UNDER CONSTRUCTION

VIDEO


Product Videos

WoodMaxx RT-80 PTO Rotary Tiller ()
  • WoodMaxx RT-80 PTO Rotary Tiller

Find Similar Products by Category

Product Reviews

Write your own product review

  1. I received my tiller today everything was fine it is a well made product and did a excellent job on both plowed ground and new broke ground, very pleased

    Posted by Unknown on 21st Feb 2014

    Very well built product and did a excellent job on both plowed ground and hard compacted soil



Choose Your Options

Quantity:



Sign up to our newsletter